BOYA BY-BM6060 Shotgun Microphone

35.000 BHD

Key Features

For Indie Films, TV & Documentaries
AA Battery or Phantom Powered
Switchable 150 Hz High-Pass Filter
Low-Noise Circuitry
Wide, Clear Frequency Response
Shockmount Impedes Handling Noise
Furry Windshield and Foam Windscreen
Rugged, Lightweight Housing

In Stock

SKU: 6971008026276 Categories: Audio For Video, Pro Audio Brand: Boya

BOYA BY-BM6060 Overview

Bundled with a furry windshield, a foam windscreen, and a vibration-reducing shockmount for clean audio with minimal extraneous noise, the BOYA BY-BM6060 shotgun microphone offers an affordable solution for videographers, indie filmmakers, and boom operators who need a flexible, full-size shotgun mic on a tight budget.

The supercardioid polar pattern delivers focused pickup in front of the mic and the switchable 150 Hz high-pass filter attenuates rumble and low-frequency handling noise. The mic’s low-noise circuitry and wide 60 Hz to 20 kHz frequency response allow quality signal capture for speech, ambient sound, and sound effects. Wind noise can be effectively reduced using the supplied windshield and windscreen.

To ensure reliable operation with a variety of devices such as cameras, mixer adapters, and portable audio recorders, the BY-BM6060 microphone runs on a single AA battery or 12 to 48 VDC phantom power. It utilizes a balanced XLR output for straightforward connectivity.

Sturdy and Lightweight

Built with an aluminum-alloy housing, the BY-BM6060 offers ruggedness while remaining lightweight, a welcome combination for comfortable use on boompoles.

Supercardioid Polar Pattern

The BY-BM6060’s supercardioid polar pattern delivers focused responsiveness in front of the mic, moderate rejection at the rear, and enhanced attenuation at the sides, making it well suited for recording subjects outdoors or in acoustically treated rooms.

Full-Range Frequency Reproduction

The wide 60 Hz to 20 kHz frequency response of the microphone allows it to accurately capture speech, ambient sounds, and more. The switchable high-pass filter attenuates low frequencies below 150 Hz to help you control difficult bass issues such as rumble and traffic noise.

Battery or Phantom Powered

Able to be run on a single AA battery or 12 to 48 VDC phantom power, the BY-BM6060 can be used with DSLRs, mirrorless cameras, professional camcorders, field recorders, and handheld audio recorders. The XLR 3-pin output provides a balanced, high-quality connection point.

Wind Protection

Use the included foam windscreen to control noise from light breezes or indoor turbulence from fans. Switch to the supplied furry windshield for enhanced wind noise reduction when recording outdoors.

Shockmount Inhibits Handling Noise

The BY-BM6060 comes with a shockmount that decouples the mic from your camera, boompole, or stand, thereby inhibiting vibrations and handling noise.

Reviews

There are no reviews yet.

Be the first to review “BOYA BY-BM6060 Shotgun Microphone” Cancel reply

You must be logged in to post a review.

BOYA BY-BM6060 Specs

Microphone

Form Factor	Stand/Boom Mount
Sound Field	Mono
Operating Principle	Pressure Gradient
Capsule	1 x Condenser
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State
Pad	None
High-Pass Filter	150 Hz
Tone Adjustment	None
Gain Adjustment	None
Indicators	1 x Blue Single LED (Power)
On-Board Controls	High-Pass Filter, On/Off
Windscreen	Foam, Windsock/Windjammer (Included)

Performance

Frequency Range	60 Hz to 20 kHz
Impedance	200 Ohms
Sensitivity	-36 dBV/Pa at 1 kHz
Signal-to-Noise Ratio	80 dB

Connectivity

Output Connectors (Analog)	1 x XLR 3-Pin Male (on Mic)
Headphone Connector	None

Power

Operating Voltage	12 to 48 V (Phantom Power) 1.5 V (Battery Power)
Battery Type	1 x AA (Not Included)

Physical

Mounting	Shockmount (Included)
Included Case	Zipper Pouch
Construction Material	Aluminum
Dimensions	ø: 0.87 x L: 11.02" / ø: 22 x L: 280 mm
Weight	4.6 oz / 130 g

Packaging Info

Package Weight	1.35 lb
Box Dimensions (LxWxH)	13.5 x 5 x 3"